FLAGON® EP/PV-F

 FLAGON® EP/PV-F is obtained by co-extrusion, by inserting a glass fibre and a 200 g/m2 polyester fleece backing. The upper sand grey layer, which is exposed, is characterised by very high resistance to weathering and ultraviolet rays.

Advantages:
- Resistance to weathering and ultraviolet rays
- Resistance to wind stress
- Will not rot
- Mechanical and puncturing resistance
- Adaptability to structural movements
- Flexibility to low temperatures
- Excellent weldability
- High environmental compability
- No-toxic

• Total adherence on horizontal surfaces (gluing on insulation panels or gluing on concrete ceilings)
• Total adherence in case of refurbishment on existing bituminous roofing

Dimensions:

• 25 x 2,10 m (52,50 sqm)
• 20 x 2,10 m (42 sqm)
• The membranes are beings stored in a dry area, if this is not the case, they should be protected by an impermeable sheet resistant to moisture, rain and snow.

Manufactured in UNI EN ISO 9001:2000 (Quality System) and UNI EN ISO 14001:2004 (Environmental System) certified plant. Laying by installers approved by Flag S.p.A. Finishing and accessories with elements manufactured and approved by Flag S.p.A.